How To Make A Collar From A Hood

Table of contents:

How To Make A Collar From A Hood
How To Make A Collar From A Hood

Video: How To Make A Collar From A Hood

Отличия серверных жестких дисков от десктопных
Video: Easy Sewing - convert a jacket hood to a collar 2023, February

The ability to alter clothes is a great opportunity to give new life to an old product. For example, a collar can be made from a boring hood - this will completely transform a jacket or coat. It is important to carefully consider the appearance of the future model and carry out the sewing work as accurately as possible. Then the thing will not look handicraft, and you will update your wardrobe without unnecessary spending.

How to make a collar from a hood
How to make a collar from a hood


  • - centimeter;
  • - scissors;
  • - chalk or remnant;
  • - water;
  • - iron;
  • - pins;
  • - sewing machine;
  • - needle;
  • - threads.


Step 1

Consider the shape of the hood, explore the different types of outerwear collars and find the one that suits you best. One of the simplest models is a short stand without a fastener. Its height should be chosen individually, depending on the height of your neck.

Step 2

Draw a cut line at the bottom of the hood according to the height of the future strut. Leave allowances for the seam 1-1.5 cm wide. If the garment has an insulating lining, carefully open it and remove it from the working part of the cut.

Step 3

Cut the wrong part of the collar from the trimmed part of the hood. Do this in the same thread direction as the top strut. The pattern on the fabric will help you align the details correctly and make them look the same. Be sure to cut the corners of the collar with scissors at an angle of 45 degrees.

Step 4

Reinforce the inner uprights with thermal adhesive (universal cotton double-layer), or non-woven (synthetic or viscose). This is necessary in order to better fix the sections and the shape of the product. When placing the lining on the wrong side of the working blade, step back a little from the edge. The glue piece should fall under the machine stitch and go 2-3 mm beyond it towards the allowance.

Step 5

Glue the cut correctly so that the collar does not wrinkle or shrink. If you use doublerin, pre-soak it in water (the optimum temperature is room temperature), and after 2 hours hang it on a rope and let the excess moisture drain. After that, glue the dampened lining with a hot iron. Use non-woven fabric only dry and do not heat the sole too much.

Step 6

Iron all allowances of the parts inward and attach the lower collar to the upper collar with the right side up. Tuck in the hem and pin it around the perimeter.

Step 7

Insert a connecting stitch 3 mm from the edge of the upright. Remove the pins. All you have to do is iron the finished hood collar.

Popular by topic